Shared voice/fax line with computer DSL/ADSL modem and answering machine
Shared voice/fax line with computer DSL/ADSL modem and answering machine
1
1
8
8
3
3
7
2
6
5
4
1
Telephone wall jack
2
Parallel splitter
3
DSL/ADSL filter
Appendix C
186
Additional fax setup
4
Phone cord provided with the printer connected to the 1-LINE port on
the back of the printer
You might need to connect the supplied phone cord to the adapter
provided for your country/region.
5
DSL/ADSL modem
6
Computer
7
Answering machine
8
Telephone (optional)
NOTE: You need to purchase a parallel splitter. A parallel splitter has one RJ-11 port on the
front and two RJ-11 ports on the back. Do not use a 2–line phone splitter, a serial splitter, or
a parallel splitter which has two RJ-11 ports on the front and a plug on the back.
To set up the printer with a computer DSL/ADSL modem
1. Obtain a DSL/ADSL filter from your DSL/ADSL provider.
NOTE: Phones in other parts of the home/office sharing the same phone number with
DSL/ADSL service need to be connected to additional DSL/ADSL filters, to avoid noise
when making voice calls.
2. Using the phone cord supplied in the box with the printer, connect one end to the DSL/ADSL
filter, then connect the other end to the port labeled 1-LINE on the back of the printer.
NOTE: You might need to connect the supplied phone cord to the adapter provided for
your country/region.
If you do not use the supplied cord to connect from the DSL/ADSL filter to the printer, you
might not be able to fax successfully. This special phone cord is different from the phone
cords you might already have in your home or office.
3. Connect the DSL/ADSL filter to the splitter.
4. Unplug the answering machine from the telephone wall jack, and connect it to the port labeled
2-EXT on the back of the printer.
NOTE: If you do not connect your answering machine directly to the printer, fax tones
from a sending fax machine might be recorded on your answering machine, and you
might not receive faxes with the printer.
5. Connect the DSL modem to the parallel splitter.
6. Connect the parallel splitter to the wall jack.
7. Set your answering machine to answer after a low number of rings.
8. Change your Rings to Answer setting on the printer to the maximum number of rings
supported by the printer.
NOTE: The maximum number of rings varies by country/region.
9. Run a fax test.
When the phone rings, your answering machine answers after the number of rings you have set,
and then play your recorded greeting. The printer monitors the call during this time, “listening” for
(continued)
Set up faxing (parallel phone systems)
187